|
|||||||||||||||||||||||||||||
|
Configuring DSL Service with the SpeedStream 5200The SpeedStream 5200 is a solution for home or small office networks. With NAT and DHCP support, the SpeedStream 5200 is a solution for those wishing to put their network online without the fees associated with purchasing Network blocks. The following information will cover the configuration of the 5200 as well as set up of TCP/IP on client machines. Before you configure your SpeedStream 5200, you must first configure your the TCP/IP on your computer to use DHCP. Configuring TCP/IP to use DHCP for client machines: Once you have finished configuring your computer, you can configure your SpeedStream 5200. The following screen shots will guide you through the process. All of the configuration for your SpeedStream 5200 is done via your web browser. If you are using Microsoft Windows or Mac OS 9 or older, you will want to use Internet Explorer. If you are using Mac OS X, then you should use Safari. Upon opening your web browser you will need to enter the address of your SpeedStream 5200. http://192.168.254.254/ Simply click the "Login" button on the left hand side. Next you will be prompted for your username and password. You should have a capital letter at the beginning of your username, for example Dusername. If your username does not appear this way, you will need to check the email message that VISI support sent you. Enter both your username and password, and click the button labeled "Show Options >>". Check the box labeled "Auto-Connect on Disconnect" as well as the box labeled "Save Settings on Connect". Finally, press the small grey button labeled "Connect". Give your router about 30 seconds to reboot itself, then click the link labeled "Home" on the left hand side. If you run into problems, or have general questions, feel free to contact our technical support. |
||||||||||||||||||||||||||||
